Skip to content
App waitlistBook a call
Book a callJoin the App waitlist

For plumbing and hydraulicsAvailable now

Every fixture, junction and bend, counted and priced.

Fixtures per bathroom, sewer, water and gas pipe by size and depth, every junction and bend, counted off your hydraulic set and priced.

Book a callJoin the App waitlist

Set up by us in your own Claude account. How the estimating plugin works.

  • NDA before we see a drawing
  • Runs in an account you own
  • Your files stay yours
  • Two founders, Brisbane, listed simPRO partner
Insulated hydraulic pipework with a pressure gauge and brass valves in a plant room

Sound familiar?

The takeoff is most of the week, and fittings get missed.

Hydraulic plans, the sanitary schedule and a superseded folder nobody documented. Upper levels say “as per the other apartment”. Fixtures a bathroom at a time, junctions on the line, pipe by depth, then a week for supplier prices.

What you get back

Three steps. The last one is yours.

  1. 01

    Drop in the hydraulic set

    Hydraulic, drainage, water and gas plans, fixture schedules, wet-area architecturals and the spec. Revisions are registered, so only current sheets are measured.

  2. 02

    Get the counted list

    Fixtures by wet area, hot water units, wastes, valves and pits as counts. Pipe by size and material, each system apart. Typical levels counted once.

  3. 03

    Your estimator decides

    Dig rates by depth, the run to the main, junction make-up, authority, CCTV and backflow allowances, and the supplier quotes. Then they sign off.

Marked-up hydraulic plan from a plumbing takeoff: sanitary fixtures, stormwater runs and downpipes tagged with their BOQ lines.BOQ workbook rows from a hydraulic takeoff: tundishes, sanitary pipe and acoustic lagging by zone and sheet with quantity and unit.
Marked-up drawing

Real output from a job like yours, anonymised

What lands in your workbook for a hydraulic tender

  • Fixtures by type and wet area, sheet on each
  • Sewer, stormwater, water and gas pipe by size
  • Junctions, 45s, bends and IOs by type and size
  • Hot water units, pumps, pits and fire collars

After the quote

Then the rest of the office, in the App.

FAQ

Questions plumbing businesses ask.

Have you set this up for a business like ours?

Yes. Commercial plumbing businesses run it on live tenders, after blind takeoffs on jobs they had already priced, compared line by line.

Does it read our drawing types?

Yes. Hydraulic, drainage, water and gas plans, fixture schedules and the spec, plus wet-area architecturals, as PDF. Flattened drawings are read as images.

Will it use our rates?

Yes. Your Excel stays yours: metre rates from a six-metre length and fittings, dig rate per m³, per-bathroom allowances and your supplier CSV, formulas kept.

Does it pick up the fittings on the sewer line?

Every drawn fitting is counted by type and size, with a crop of the drawing. If you derive fittings from pipe length instead, that rule is set up.

Neighbouring trades

The App

Put your name down for the App.

Five taps and your email. One of us reads it and replies.

Join the waitlist

Tell us what eats your week.

Join the App waitlist

Launching February 2027. No obligation, one of us replies.